PiPress®️ Stainless Steel Pipes
Inox Piping System You Can Trust
Reliable
Durable material, solid sealing, strong connection; lifetime warranty
Safety
Comply with CE/PED, WRAS, KIWA, DVGW, WaterMark, FDA, NSF, ASME B31.1, B31.3, and B31.9
Easy & Fast
3-15seconds to finish a connection; no special trainning required
Cost-Effective
PiPress light gauge inox pipes could save your total cost, installed with our unique press fittings.
The PiPress Thin Wall and Light Gauge system is designed to provide a fast, easy method of joining off-the-shelf thin wall inox pipes.
PiPress pipes are practiced to bear working pressure upto 232 psi/16Bar
- Size range from ½” – 16″/(DN15(15mm) – DN400(426mm)) Types stainless steel pipe;
- Flameless, easy, fast, simple, reliable and durable;
- Rated up to 232 psi/16Bar;
- Materials: EN1.4301(AISI304(L)) and EN1.4404(AISI 316L)
- Comply with CE/PED, WRAS, KIWA, DVGW, WaterMark, FDA, NSF, ASME B31.1, B31.3, and B31.9
- Meet piping standards BS EN/DIN 10312, EN10088, EN10217, ASTM A312, JIS G3448 etc
PiPress Advantages
PiPress offers variety of mechanical piping joining fittings, which allows you install the piping system never been so easy!
Inox Stainless steel material is safe, strong and reliable than other traditional materials.
BS EN/EU/DIN standard sizes
PiPress BS EN/DIN standards inox pipes are manufactured strictly according to EN-10312(both Series 2 and Series 1 are available) and EN-10888 standards. We offer different surface processing, including fine polishing, natural pickling and others.
We strictly control our production processes and make quality tests during production as well to guarantee our pipes reaching the highest standards. A PiPress pipe was finished only after: coil- raw material inspection and analytics-slitting-auto-welding-seam grinding-cut to length-degreasing-annealing-straightening-pickling-flat end-X ray test(when required)-Hydrostatic pressure test-pickling/passivating-inspection-marking-packing.
EU/BS EN/DIN Standard Pipe/Tube Specifications
| Nominal Diameter | Outside Diameter (mm) | Wall Thickness (mm) | Length(Tailored length accepted) |
|---|---|---|---|
| DN12 | 15 | 1.0 | 6000 |
| DN15 | 18 | 1.0 | 6000 |
| DN20 | 22 | 1.2 | 6000 |
| DN25 | 28 | 1.2 | 6000 |
| DN32 | 35 | 1.5 | 6000 |
| DN40 | 42 | 1.5 | 6000 |
| DN50 | 54 | 1.5 | 6000 |
| DN65 | 76.1 | 2.0 | 6000 |
| DN80 | 88.9 | 2.0 | 6000 |
| DN100 | 108 | 2.0 | 6000 |
| DN125 | 139.7 | 2.5 | 6000 |
| DN150 | 168.3 | 2.5 | 6000 |
Standard Thin/Light Gauge Pipe/Tube Sizes
PiPress®️ Lite standard thin wall/light gauge inox pipes are manufactured strictly according to particular standards. We offer different surface processing, including fine polishing, natural pickling and others. Light gauge series pipes are offered with very competitive prices to different industries which are cost sensitive. However, it doesn’t compromise to quality and operation safety.
We strictly control our production processes and make quality tests during production as well to guarantee our pipes reaching the highest standards. A PiPress pipe was finished only after: coil- raw material inspection and analytics-slitting-auto-welding-seam grinding-cut to length-degreasing-annealing-straightening-pickling-flat end-X ray test(when required)-Hydrostatic pressure test-pickling/passivating-inspection-marking-packing.
Light Gauge Pipe/Tube Specifications
| Nominal Diameter | Outside Diameter (mm) | Wall Thickness (mm) | Length(Tailored length accepted) |
|---|---|---|---|
| DN15 | 16 | 0.8 | 6000 |
| DN20 | 20 | 1.0 | 6000 |
| DN25 | 25.4 | 1.0 | 6000 |
| DN32 | 32 | 1.0 | 6000 |
| DN40 | 40 | 1.2 | 6000 |
| DN50 | 50.8 | 1.2 | 6000 |
| DN65 | 76.1 | 1.5 | 6000 |
| DN80 | 88.9 | 1.5 | 6000 |
| DN100 | 101.6 | 2.0 | 6000 |
| DN100-L | 108 | 2.0 | 6000 |
| DN125 | 133 | 2.5 | 6000 |
| DN150 | 159 | 2.5 | 6000 |
| DN200 | 219 | 3.0 | 6000 |
| DN250 | 273 | 3.0 | 6000 |
| DN300 | 323 | 4.0 | 6000 |
| DN350 | 373 | 4.0 | 6000 |
| DN400 | 425 | 4.0 | 6000 |
JIS standard sizes
PiPress JIS standard inox pipes are manufactured strictly according to JIS G3448 standard.
We strictly control our production processes and make quality tests during production as well to guarantee our pipes reaching the highest standards. A PiPress pipe was finished only after: coil- raw material inspection and analytics-slitting-auto-welding-seam grinding-cut to length-degreasing-annealing-straightening-pickling-flat end-X ray test(when required)-Hydrostatic pressure test-pickling/passivating-inspection-marking-packing.
JIS Standard Pipe/Tube Specifications
| Nominal Diameter | Outside Diameter (mm) | Wall Thickness (mm) | Length(Tailored length accepted) |
|---|---|---|---|
| DN15 | 15.88 | 0.8 | 6000 |
| DN20 | 22.22 | 1.0 | 6000 |
| DN25 | 28.58 | 1.0 | 6000 |
| DN30 | 34 | 1.2 | 6000 |
| DN40 | 42.7 | 1.2 | 6000 |
| DN50 | 48.6 | 1.2 | 6000 |
| DN60 | 60.5 | 1.5 | 6000 |
| DN65 | 76.3 | 1.5 | 6000 |
| DN80 | 89.1 | 2.0 | 6000 |
| DN100 | 108 | 2.0 | 6000 |
